Corona-virus has started to hit India. Govt. has started to enforce lock-downs and even started curfew where lock-down wasn’t taken seriously.
We have been in quarantine from 2 days now. I went out today to buy some groceries, it wasn’t busy, but roads looked clean and the way they should look like in normal day without so heavy population.
It was a nice drive, clean environment and I was told so far no issue with supply, so we should be good.
Started a small workout to keep my sanity, else locked with wife and kid is going to be daunting. We did 20 squats, 20 pushups and 20 lunges. Also did a small 3 min meditation session, going to increase these as day passes by.
I’ll keep everyone posted on how my days pass.
Keep Safe, keep at home and let nature heal itself before we go back to destroy it again.
Please follow this, very nice explanation of boot process:
Setting up TCP stack for best performance in solaris:
ndd -set /dev/ip ip_forwarding 0
ndd -set /dev/tcp tcp_wscale_always 1
ndd -set /dev/tcp tcp_tstamp_if_wscale 1
ndd -set /dev/tcp tcp_max_buf 16777216
ndd -set /dev/tcp tcp_cwnd_max 8388608
ndd -set /dev/tcp tcp_xmit_hiwat 2048576
ndd -set /dev/tcp tcp_recv_hiwat 2048576
# memory interface this is the big gainer
set net.ipv4.tcp_sack = 0
# sets min/default/max TCP read buffer, default 4096 87380 174760
set net.ipv4.tcp_rmem = 10000000 10000000 10000000
# sets min/pressure/max TCP write buffer, default 4096 16384 131072
set net.ipv4.tcp_wmem = 10000000 10000000 10000000
# sets min/pressure/max TCP buffer space, default 31744 32256 32768
set net.ipv4.tcp_mem = 10000000 10000000 10000000
### CORE settings
# maximum receive socket buffer size, default 131071
set net.core.rmem_max = 524287
# maximum send socket buffer size, default 131071
set net.core.wmem_max = 524287
# default receive socket buffer size, default 65535
set net.core.rmem_default = 524287
# default send socket buffer size, default 65535
set net.core.wmem_default = 524287
# maximum amount of option memory buffers, default 10240
set net.core.optmem_max = 524287
# number of unprocessed input packets before kernel starts dropping
# them, default 300
set net.core.netdev_max_backlog = 300000
I know sometime it seems a bit difficult to assign LUN’s to Solaris, here are my goto Steps:
1: Verify HBA port info to ensure assignment is correct:
# fcinfo hba-port -l
2: find LUN
3: Format LUN
‘fdisk’ and ‘label’
4: Put the device names (ending with s2) into /etc/lvm/md.tab
5: Finish off with
newfs -v /dev/md/rdsk/dnn
set entries in /etc/vfstab so a mount –a
and you are done.
What a nightmare, ok so I gave it a Try, Let me give my 2 cent on this. Let’s start with what I liked
- Interface, no doubt it’s better then Windows 8.1, but I feel it’s not better then Windows 7.
- Edge Browser
- Latest and greatest security updates
Now Let’s go with what I didn’t like
- Edge browser, as my VPN din’t worked with it
- Updates (Do I need to explain)
- Terms and Condition
- Why Microsoft why, how can I agree to sign up where you have control over my software, games and hardware.
- So if a hardware is not Microsoft recommendation, MSFT have control over disabling them.
- So does all pirated games and software, Like MSFT have any better.
- Interface, It’s not revolutionary and doesn’t make it all nice and awesome to use on System, it looks more designed for Portable devices and touch devices, and Frankly I don’t like it for Enterprise or for Work.
For me Windows 10 was a disappointment. It’s becoming quite a trend for MSFT. They need to come up with something better and allow consumers to have power.
To increase a File system size, you basically need to follow 4 steps
1: Find which meta belongs to Mount
2: Add Slice to Meta:
metattach d51 /dev/dsk/c11t60060160F87019005E06236CFC36E111d0s0
3: Make sure meta is showing new slice
4: Grow File System
growfs -M /u01 /dev/md/rdsk/d51
Something from my old notes: Root mirroring in Solaris:
Root disk – c5t500000E010F08540d0
Mirror disk – c5t500000E010EFE890d0
Transfer the partition table
prtvtoc /dev/rdsk/c5t500000E010F08540d0s2 | fmthard -s – /dev/rdsk/c5t500000E010EFE890d0s2
Creation of meta databases
metadb -c 2 -a -f /dev/dsk/c5t500000E010F08540d0s7 /dev/dsk/c5t500000E010EFE890d0s7
Initialising the meta devices
metainit -f d10 1 1 c5t500000E010F08540d0s0
metainit d20 1 1 c5t500000E010EFE890d0s0
metainit -f d17 1 1 c5t500000E010F08540d0s7
metainit d27 1 1 c5t500000E010EFE890d0s7
Creating the mirrors
metainit -f d0 -m d10
metainit -f d7 -m d17
#Activate root meta
Modify the vfstab for other metadevice entries for d7
Modify the system file
echo “set md:mirrored_root_flag=1” >> /etc/system
Modify the OBP boot device to boot with the mirror
eeprom “nvramrc=devalias mirror /scsi_vhci/ssd@g500000e010f08540:a devalias mirror-a /scsi_vhci/ssd@g500000e010f08541:a”
Install the boot block on the mirror disk
installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c5t500000E010EFE890d0s0
Attaching the mirror disk sub mirrors
metattach d0 d20
metattach d7 d27
“In Your life, There is no such a thing as you can do it or you can’t, but it’s a matter of ‘doing it or not doing it.’ “